Online Catalog

LPD Series

LPD Series
  • Elliptical fins with 0.75-0.95mm fin thickness.
  • Low presure drop heat sink for highly populated system.
  • Click on model number for detailed information including specifications and performance data.
catalog 3D CAD RoHS REACH
LPD Series Heat Sink Model Base Size (mm) Height (mm) Drawing
LPD15 15 x 15 3 – 25 DXF
LPD17 17 x 17 DXF
LPD19 19 x 19 DXF
LPD22 22 x 22 DXF
LPD25 25 x 25 DXF
LPD28 28 x 28 DXF
LPD30 30 x 30 3 – 35 DXF
LPD32 32 x 32 DXF
LPD35 35 x 35 DXF
LPD38 38 x 38 DXF
LPD40 40 x 40 DXF
LPD42 42 x 42 6 – 35 DXF
LPD45 45 x 45 DXF
LPD50 50 x 50 6 – 40 DXF
LPD52 52 x 52 DXF
LPD54 54 x 54 DXF
LPD60 60 x 60 DXF
LPD70 70 x 70 8 – 40 DXF
LPD80 80 x 80 DXF
LPD90 90 x 90 DXF
LPD100 100 x 100 10 – 40 DXF
LPD130 130 x 130 15 – 45 DXF
JLP2B *Larger than 100 x 100

Reference to Joint heat sink

・JLP2B(based on LPD100) : Recommended when one side is between 70 mm and 100 mm and the other side is over 100 mm.

・JLP4R(based on LPD70130) : Recommended when one side is between 100 mm and 130 mm and the other side is over 100 mm.

・JLPB6(based on LPD13070) : Recommended when one side is between 100 mm and 130 mm and the other side is over 100 mm, depending on the orientation of the fins.

* We can also produce larger sizes. Please refer to each page for size maximums and fin orientation.

12 – 40
Rectangular
heatsinkv
heatsinkv
LPD2030 LPD3020 20 x 30 30 x 20 3 – 25 DXF(LPD2030) DXF(LPD3020)
LPD2040 LPD4020 20 x 40 40 x 20 DXF(LPD2040) DXF(LPD4020)
LPD3040 LPD4030 30 x 40 40 x 30  3 – 35 DXF(LPD3040) DXF(LPD4030)
LPD3550 LPD5035 35 x 50 50 x 35  6 – 35 DXF(LPD3550) DXF(LPD5035)
LPD4060 LPD6040 40 x 60 60 x 40 DXF(LPD4060) DXF(LPD6040)
LPD5070 LPD7050 50 x 70 70 x 50  8 – 35 DXF(LPD5070) DXF(LPD7050)
LPD6080 LPD8060 60 x 80 80 x 60 DXF(LPD6080) DXF(LPD8060)
LPD60120 LPD12060 60 x 120 120 x 60 8 – 40 DXF(LPD60120) DXF(LPD12060)
LPD70130 LPD13070 70 x 130 130 x 70 DXF(LPD70130) DXF(LPD13070)
LPD8090 LPD9080 80 x 90 90 x 80 DXF(LPD8090) DXF(LPD9080)
LPD80100 LPD10080 80 x 100 100 x 80 DXF(LPD80100) DXF(LPD10080)
JLP4R JLPB6 *Larger than
70 x 130
*Larger than
130 x 70

Reference to Joint heat sink

・JLP2B(based on LPD100) : Recommended when one side is between 70 mm and 100 mm and the other side is over 100 mm.

・JLP4R(based on LPD70130) : Recommended when one side is between 100 mm and 130 mm and the other side is over 100 mm.

・JLPB6(based on LPD13070) : Recommended when one side is between 100 mm and 130 mm and the other side is over 100 mm, depending on the orientation of the fins.

* We can also produce larger sizes. Please refer to each page for size maximums and fin orientation.

12 – 40

© 2008-2023 Alpha Novatech, Inc.