Pushpins are a popular mechanical attachment, offering flexibility & reliability at reasonable cost.
Hole location and attachment forces can be customized for each specific application.
Captive pushpins and springs allow for a simple installation. Easy!
Pushpin attachment has passed all shock and vibration testing.
Appropriate attachment force/pressure can be consistently generated through pushpin/spring selection.
High performance interface materials including phase change and thermal grease can be used instead of tape or epoxy.
Reference: About Pushpin with Spring Attachment
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | PCB Hole Dia. (mm) | Drawing | |
---|---|---|---|---|---|---|
LPDM25 | 25 x 25 | 8, 10, 12, 15, 20, 25 | 18 x 18 | 2.5 | DXF | |
3.175 | DXF | |||||
LPDM30 | 30 x 30 | 23 x 23 | 2.5 | DXF | ||
3.175 | DXF | |||||
LPDM35 | 35 x 35 | 28 x 28 | 2.5 | DXF | ||
3.175 | DXF | |||||
LPDM40 | 40 x 40 | ( 7 ), 10, 12, 15, 20, 25, 30, 35 | 33 x 33 | 2.5 | DXF | |
3.175 | DXF | |||||
LPDM45 | 45 x 45 | 38 x 38 | 2.5 | DXF | ||
3.175 | DXF | |||||
LPDM50 | 50 x 50 | ( 7 ), 10, 12, 15, 20, 25, 30, 35, 40 | 43 x 43 | 3.175 | DXF | |
LPDM54 | 54 x 54 | 47 x 47 | DXF | |||
LPDM60 | 60 x 60 | 53 x 53 | DXF | |||
LPDM70 | 70 x 70 | 10, 12, 15, 20 25, 30, 35, 40 | 63 x 63 | DXF |
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | PCB Hole Dia. (mm) | Drawing | |
---|---|---|---|---|---|---|
LPDH25 | 25 x 25 | 8, 10, 12, 15, 20, 25 | 18 x 18 | 2.5 | DXF | |
3.175 | DXF | |||||
LPDH30 | 30 x 30 | 23 x 23 | 2.5 | DXF | ||
3.175 | DXF | |||||
LPDH35 | 35 x 35 | 28 x 28 | 2.5 | DXF | ||
3.175 | DXF | |||||
LPDH40 | 40 x 40 | ( 7 ), 10, 12, 15, 20, 25, 30, 35 | 33 x 33 | 2.5 | DXF | |
3.175 | DXF | |||||
LPDH45 | 45 x 45 | 38 x 38 | 2.5 | DXF | ||
3.175 | DXF | |||||
LPDH50 | 50 x 50 | ( 7 ), 10, 12, 15, 20, 25, 30, 35, 40 | 43 x 43 | 3.175 | DXF | |
LPDH54 | 54 x 54 | 47 x 47 | DXF | |||
LPDH60 | 60 x 60 | 53 x 53 | DXF | |||
LPDH70 | 70 x 70 | 10, 12, 15, 20 25, 30, 35, 40 | 63 x 63 | DXF |
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | PCB Hole Dia. (mm) | Drawing | |
---|---|---|---|---|---|---|
LPDP80 | 80 x 80 | 10, 12, 15, 20, 25 | 70 x 70 | 3.175 | DXF | |
LPDP90 | 90 x 90 | 10, 12, 15 | 80 x 80 | DXF |
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | PCB Hole Dia. (mm) | Drawing | |
---|---|---|---|---|---|---|
UBM25 | 25 x 25 | 8, 10, 12, 15, 20, 25 | 18 x 18 | 2.5 | DXF | |
3.175 | DXF | |||||
UBM30 | 30 x 30 | 23 x 23 | 2.5 | DXF | ||
3.175 | DXF | |||||
UBM35 | 35 x 35 | 28 x 28 | 2.5 | DXF | ||
3.175 | DXF | |||||
UBM40 | 40 x 40 | ( 7 ), 10, 12, 15, 20, 25 | 33 x 33 | 2.5 | DXF | |
3.175 | DXF | |||||
UBM45 | 45 x 45 | 38 x 38 | 2.5 | DXF | ||
3.175 | DXF | |||||
UBM50 | 50 x 50 | 43 x 43 | 3.175 | DXF | ||
UBM54 | 54 x 54 | 47 x 47 | DXF | |||
UBM60 | 60 x 60 | 53 x 53 | DXF | |||
UBM70 | 70 x 70 | 10, 12, 15, 20, 25 | 63 x 63 | DXF |
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | PCB Hole Dia. (mm) | Drawing | |
---|---|---|---|---|---|---|
UBH25 | 25 x 25 | 8, 10, 12, 15, 20, 25 | 18 x 18 | 2.5 | DXF | |
3.175 | DXF | |||||
UBH30 | 30 x 30 | 23 x 23 | 2.5 | DXF | ||
3.175 | DXF | |||||
UBH35 | 35 x 35 | 28 x 28 | 2.5 | DXF | ||
3.175 | DXF | |||||
UBH40 | 40 x 40 | ( 7 ), 10, 12, 15, 20, 25 | 33 x 33 | 2.5 | DXF | |
3.175 | DXF | |||||
UBH45 | 45 x 45 | 38 x 38 | 2.5 | DXF | ||
3.175 | DXF | |||||
UBH50 | 50 x 50 | 43 x 43 | 3.175 | DXF | ||
UBH54 | 54 x 54 | 47 x 47 | DXF | |||
UBH60 | 60 x 60 | 53 x 53 | DXF | |||
UBH70 | 70 x 70 | 10, 12, 15, 20, 25 | 63 x 63 | DXF |
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | PCB Hole Dia. (mm) | Drawing | |
---|---|---|---|---|---|---|
UBP80 | 80 x 80 | 10, 12, 15, 20, 25 | 70 x 70 | 3.175 | DXF | |
UBP90 | 90 x 90 | 10, 12, 15 | 80 x 80 | DXF |
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | PCB Hole Dia. (mm) | Drawing | |
---|---|---|---|---|---|---|
ZM25 | 25 x 25 | 8.0, 9.5, 12.7 | 18 x 18 | 2.5 | DXF | |
3.175 | DXF | |||||
ZM30 | 30 x 30 | 23 x 23 | 3.175 | DXF | ||
ZM35 | 35 x 35 | 28 x 28 | DXF | |||
ZM40 | 40 x 40 | 9.5, 12.7 | 33 x 33 | DXF | ||
ZM45 | 45 x 45 | 38 x 38 | DXF | |||
ZM50 | 50 x 50 | 43 x 43 | DXF | |||
ZM54 | 54 x 54 | 47 x 47 | DXF | |||
ZM60 | 60 x 60 | 53 x 53 | DXF |
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | PCB Hole Dia. (mm) | Drawing | |
---|---|---|---|---|---|---|
ZH25 | 25 x 25 | 8.0, 9.5, 12.7 | 18 x 18 | 2.5 | DXF | |
3.175 | DXF | |||||
ZH30 | 30 x 30 | 23 x 23 | 3.175 | DXF | ||
ZH35 | 35 x 35 | 28 x 28 | DXF | |||
ZH40 | 40 x 40 | 9.5, 12.7 | 33 x 33 | DXF | ||
ZH45 | 45 x 45 | 38 x 38 | DXF | |||
ZH50 | 50 x 50 | 43 x 43 | DXF | |||
ZH54 | 54 x 54 | 47 x 47 | DXF | |||
ZH60 | 60 x 60 | 53 x 53 | DXF |