Mounting pins only require 1.8mm[.071"] diameter holes in the PCB.
Heat sink comes pre-assembled with clip, ready for installation. Press and slide to install. Easy!
Heat sinks are attached to the PCB instead of the chip package or substrate.
Heat sink location and orientation is precisely set by anchor pin.
Anchor pin location can be changed.
By using different torsion springs and anchor pins, an appropriate attachment force can be generated.
Reference: About QuickSet (QT series)
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | Drawing | |
---|---|---|---|---|---|
QTLM35 | 35 x 35 | 10, 12, 15, 20, 25, 30 | 27 x 27 | DXF | |
QTLM40 | 40 x 40 | 32 x 32 | DXF | ||
QTLM45 | 45 x 45 | 37 x 37 | DXF | ||
QTLM50 | 50 x 50 | 42 x 42 | DXF | ||
QTLM54 | 54 x 54 | 46 x 46 | DXF | ||
QTLM60 | 60 x 60 | 52 x 52 | DXF |
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | Drawing | |
---|---|---|---|---|---|
QTLH35 | 35 x 35 | 10, 12, 15, 20, 25, 30 | 27 x 27 | DXF | |
QTLH40 | 40 x 40 | 32 x 32 | DXF | ||
QTLH45 | 45 x 45 | 37 x 37 | DXF | ||
QTLH50 | 50 x 50 | 42 x 42 | DXF | ||
QTLH54 | 54 x 54 | 46 x 46 | DXF | ||
QTLH60 | 60 x 60 | 52 x 52 | DXF |
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | Drawing | |
---|---|---|---|---|---|
QTUM35 | 35 x 35 | 10, 12, 15, 20, 25 | 27 x 27 | DXF | |
QTUM40 | 40 x 40 | 32 x 32 | DXF | ||
QTUM45 | 45 x 45 | 37 x 37 | DXF | ||
QTUM50 | 50 x 50 | 42 x 42 | DXF | ||
QTUM54 | 54 x 54 | 46 x 46 | DXF | ||
QTUM60 | 60 x 60 | 52 x 52 | DXF |
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | Drawing | |
---|---|---|---|---|---|
QTUH35 | 35 x 35 | 10, 12, 15, 20, 25 | 27 x 27 | DXF | |
QTUH40 | 40 x 40 | 32 x 32 | DXF | ||
QTUH45 | 45 x 45 | 37 x 37 | DXF | ||
QTUH50 | 50 x 50 | 42 x 42 | DXF | ||
QTUH54 | 54 x 54 | 46 x 46 | DXF | ||
QTUH60 | 60 x 60 | 52 x 52 | DXF |
© 2018-2022 Alpha Novatech, Inc.