Pushpins are a popular mechanical attachment, offering flexibility & reliability at reasonable cost.
Hole location and attachment forces can be customized for each specific application.
Captive pushpins and springs allow for a simple installation. Easy!
Pushpin attachment has passed all shock and vibration testing.
Appropriate attachment force/pressure can be consistently generated through pushpin/spring selection.
High performance interface materials including phase change and thermal grease can be used instead of tape or epoxy.
Reference: About Pushpin with Spring Attachment
![]() |
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | Drawing |
---|---|---|---|---|---|
LPDR19 | 19 x 19 | 8, 10, 12, 15, 20 | 22 x 22 | DXF | |
LPDR25 | 25 x 25 | 8, 10, 12, 15, 20, 25 | 30 x 30 | DXF | |
LPDR30 | 30 x 30 | 8, 10, 12, 15, 20, 25 30, 35 |
35 x 35 | DXF | |
LPDR35 | 35 x 35 | 40 x 40 | DXF | ||
LPDR40 | 40 x 40 | 45 x 45 | DXF | ||
LPDR45 | 45 x 45 | 50 x 50 | DXF |
![]() |
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | Drawing |
---|---|---|---|---|---|
LPDL19 | 19 x 19 | 8, 10, 12, 15, 20 | 22 x 22 | DXF | |
LPDL25 | 25 x 25 | 8, 10, 12, 15, 20, 25 | 30 x 30 | DXF | |
LPDL30 | 30 x 30 | 8, 10, 12, 15, 20, 25 30, 35 |
35 x 35 | DXF | |
LPDL35 | 35 x 35 | 40 x 40 | DXF | ||
LPDL40 | 40 x 40 | 45 x 45 | DXF | ||
LPDL45 | 45 x 45 | 50 x 50 | DXF |
![]() |
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | Drawing |
---|---|---|---|---|---|
UBR19 | 19 x 19 | 8, 10, 12, 15, 20 | 22 x 22 | DXF | |
UBR25 | 25 x 25 | 8, 10, 12, 15, 20, 25 | 30 x 30 | DXF | |
UBR30 | 30 x 30 | 35 x 35 | DXF | ||
UBR35 | 35 x 35 | 40 x 40 | DXF | ||
UBR40 | 40 x 40 | 45 x 45 | DXF | ||
UBR45 | 45 x 45 | 50 x 50 | DXF |
![]() |
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | Drawing |
---|---|---|---|---|---|
UBL19 | 19 x 19 | 8, 10, 12, 15, 20 | 22 x 22 | DXF | |
UBL25 | 25 x 25 | 8, 10, 12, 15, 20, 25 | 30 x 30 | DXF | |
UBL30 | 30 x 30 | 35 x 35 | DXF | ||
UBL35 | 35 x 35 | 40 x 40 | DXF | ||
UBL40 | 40 x 40 | 45 x 45 | DXF | ||
UBL45 | 45 x 45 | 50 x 50 | DXF |
![]() |
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | Drawing |
---|---|---|---|---|---|
NR25 | 25 x 25 | 8, 10, 12, 15, 20, 25 | 30 x 30 | DXF | |
NR30 | 30 x 30 | 35 x 35 | DXF | ||
NR35 | 35 x 35 | 40 x 40 | DXF | ||
NR40 | 40 x 40 | 45 x 45 | DXF | ||
NR45 | 45 x 45 | 50 x 50 | DXF |
![]() |
Model | Base Size (mm) | Height (mm) | Hole Pitch (mm) | Drawing |
---|---|---|---|---|---|
SR25 | 25 x 25 | 8, 10, 12, 15, 20, 25 | 30 x 30 | DXF | |
SR30 | 30 x 30 | 35 x 35 | DXF | ||
SR35 | 35 x 35 | 40 x 40 | DXF | ||
SR40 | 40 x 40 | 45 x 45 | DXF |